Plustek opticfilm 7200 driver for mac

Film is loaded straight through the scanner from the side. • View topic - USB Scaner doesn't connect

Negatives are easy to align in the film holder. Mounted slides clip firmly into place on the slide carrier. In terms of build quality, the black plastic film carriers are a little disappointing as they feel quite flimsy. Saying that, so long as they are treated with care, they should last. Both carriers are easy to load.

Mounted slides clip firmly into place and negatives are easy to align. The carriers load into the side of the machine, and are pushed straight through. The indexing marks provided for each frame are a little loose in the scanner, and I find a little fiddling is required for each frame to ensure accurate alignment.

Three buttons are located on the front of the unit. The power switch completely cuts power from the unit, which should please the energy conscious amongst us, although the power transformer still stays warm when plugged in, which means it is still drawing some power.

  1. best touch screen monitor for mac mini;
  2. Plustek OpticFilm i SE review - Amateur Photographer!
  3. Question Info?
  4. toshiba printer drivers for mac.
  5. Ease of Use?
  6. Plustek OpticFilm Driver update - Microsoft Community.

There is zero warm up time once the unit is switched on and you can begin scanning straight away. Two other buttons are provided, on marked QuickScan and the Other Intelliscan.

More about SilverFast

Each provide a quick and dirty way of scanning each frame loaded without faffing too much in the Silverfast software. Plustek Opticfilm Performance Scans are performed in a timely fashion, and are a vast improvement over the older generation of Plustek Scanners. A pre scan only takes Reducing the resolution not only results in smaller file sizes, but dramatically improves scan speeds too.

Scanning at dpi only takes one minute and 28 seconds.

Plustek OpticFilm 7200 Driver update

Plustek Opticfilm Detail As we've found with previous tests of Plustek scanners, it compares extremely well, especially when the price is taken into account. The scan produced by the Opticfilm is just a shade softer than the i, but is a marked improvement over the i. The amount of detail captured is clear to see when compared to the results from the Minolta Dimage Scan Elite 2 and the budget Jessops PF Although both these scanners are now discontinued, they are a good benchmark for assessing the quality of reproduction. Other articles you might find interesting I've just finished copying some of my dad's old film onto digital and yeah this does the job but 57 images did take me around an hour to do with the quick scan.

The quality was good though even on film that was 27 years old since they were developed. It would have been a better idea to put the hinges on the longer side, at least from a handling point of view. It's really only made for use with perfectly flat strips - any curling in the film will make it very hard to position it properly in the holder, not to mention it will likely result in a more or less blurred scan.

There are two ways to scan your photos with the OpticFilm i AI. One is called QuickScan, while the other is dubbed IntelliScan.

Plustek OpticFilm 8100 - 7200 dpi - CCD

Each has its dedicated button on the front panel of the scanner, but both can also be initiated from the computer as well. As the name suggests, the QuickScan option is for those who do not want to fiddle too much with settings.

A few of them can be adjusted in a dedicated window, but the choices are limited. You can tell the scanner whether you are scanning a negative or a transparency, whether you want to open the scanned photo in Presto! ImageFolio or just save it on your hard disk, you can specify the file format, the destination folder, a file name prefix, the scanning mode 24 or bit colour, 8 or bit black-and-white , the input resolution, apply one of a few image filters, and make basic brightness, contrast and gamma adjustments.

In addition, there are a few tick-boxes, allowing you to enable a preview window to be shown with each scan and to let the scanner auto process the images to some degree. Crucially, you do not get access to infrared dust removal, multi-scanning, multi-exposure, negative film profiles or manual colour correction when using the QuickScan utility - in other words, you are giving up most of the features you have paid for.

For this reason, those who plan on using the QuickScan utility only should consider buying the cheaper OpticFilm instead of the i. The above adjustments affect all scans until you call up the QuickScan Setting window again. If you opt to enable the scan preview, a few of the settings can be tweaked individually with each scan but others cannot, making QuickScan cumbersome to use, which kind of defeats the very point of this feature. The preview window of the QuickScan utility. SilverFast is a professional-grade imaging application, and as such, it is the exact opposite of the QuickScan utility.

The options it offers are dazzling to say the least, and intuitiveness isn't among the program's virtues. This means that even if you have a fair bit of experience in image editing, you may find that it takes time to master this peculiar piece of software. On the CD, there are a number of MOV files that demonstrate what the different functions do and how they are meant to be used - they are worth checking out.

Given that QuickScan provides no access to some of the Plustek i's most useful features, you will have to learn how to use SilverFast, no matter how intimidating it may seem at first sight. To be fair though, some of SilverFast's features are actually quite straightforward to use. One of the handiest is called NegaFix.

Opticfilm 7200 Windows 10

Negative films are not simply the inverse of positive film - they all have an orange mask, which needs to be filtered out in order to get the colours right. To make matters more complicated, every type of negative film has its own version of this orange mask, giving you no one-size-fits-all solution to this problem. This is where NegaFix comes in: it stores profiles for a legion of print films, so if you intend to scan one that's included in its database, chances are you can get over the colour issue quickly and easily. Many of SilverFast's functions are accessible via dedicated buttons arranged in a vertical row along the left side of the program's scan preview window.

Jan , Advanced search. Post a reply. Nov , Hello, I've have a Plustek Opticfilm i diapos scanner. It only works on windows. There is not any way to use it on Mac OS. So I decide to use virtualbox with Windows XP in order to connect this scaner to my machine.

Please try again later. Could someone have the same problem? Thank you very much to all of you Jose Maria.